SEARCH OUR CATALOG
Specialty Tying Tools
| BILL'S "BENCH-TOP SLAB" Item # RF029 |
$15.95 |
BILL'S "BENCH-TOP SLAB" This was a wildly popular item for us throughout the '90s, but we were cut-off in 2001 when the mfg decided it was too much trouble to cut the material to size and smooth the edges for us fly tyers. F-C team member Bill Hastings has found a new source! The BENCH TOP SLAB is made from a dull, milky easy-on-the-eyes material. Resists stains, epoxies, head cements, glues and lacquers. NOTHING STICKS TO IT. Simply scrape off adhesive build-up with your nail. Protects your tabletops. An all-time favorite. 12" x 12"
>> View Item
| High Grade 5" Straight Scissors Item # RF046 |
$15.95 |
NEW! HIGH-GRADE 5" STRAIGHT STAINLESS STEEL ADJUSTABLE SCISSORS are a real value, and work-horses at the tying bench. They feature extra-large finger holes and plastic dipped handles for comfort. Please note: Always back the adjusting nut out for the specific material you will be cutting. Great utility scissors for a number of jobs. Especially tempered for synthetics.
>> View Item
| High Grade 5" Curved Scissors Item # RF047 |
$15.95 |
HIGH-GRADE 5" CURVED STAINLESS STEEL ADJUSTABLE SCISSORS are a real value, and work-horses at the tying bench. They feature extra-large finger holes and plastic dipped handles for comfort. Please note: Always back the adjusting nut out for the specific material you will be cutting. Great utility scissors for a number of jobs. Especially tempered for synthetics.
>> View Item
| High Grade 5" Thinning Shears Item # RF048 |
$19.95 |
NEW! HIGH-GRADE 5" STAINLESS STEEL ADJUSTABLE THINNING SHEARS are a real value, and work-horses at the tying bench. They feature extra-large finger holes and plastic dipped handles for comfort. Especially tempered for synthetics. Please note: Always back the adjusting nut out for the specific material you will be cutting. This is very important. Practice on some unusable material for fine tuning.
>> View Item
| Turbo Dubbing Twister Item # RS0010 |
$25.95 |
TURBO DUBBING TWISTER"The Original "TURBO DUBBING TWISTER" from Czechoslovakia Finest tool of it's kind ever made. 6-ball bearings in a 3/4" bearing-race, with a solid brass housing. A ONE-HANDED DUBBING-LOOP TOOL. Simply hold it by its 3-3/4" long brass handle, and spin the brass housing with your thumb. It never stops spinning! Instantly creates a tight dubbing-loop. THE BEST
>> View Item
| Ez Mini Hackle Pliers Item # RS002 |
$3.95 |
E-Z MINI HACKLE PLIERS Still our favorite. And don't be fooled by the imported "copy" with the ring attached. They are junk. This is the American made tool. Push the end, and the "hook" comes out to grab the hackle. My preferred hackle-pliers for many years.
>> View Item
| Rite Bobbins Item # RS003 |
$19.95 |
RITE FLY TYING BOBBINS have adjustable thread tension. Each 2-3 turns on the screw-disc adds about 1-ounce of tension to the tying thread. Ceramic insert in tubes for a lifetime of use. SIZES: (1)Trout $19.95 (2)Bass/Salt $29.95
>> View Item
| Wiss Quick Clip Item # RS004 |
$19.95 |
WISS "QUICK-CLIP" SPEED CUTTER has razor sharp blades with very fine, very sharp points. ONE HAND OPERATION. Ring-handle fits comfortably over middle finger.
>> View Item
| Wiss Quick Clip Replacment Blades Item # RS005 |
$9.95 |
REPLACEMENT BLADES for Wiss "Quick-Clip"
>> View Item
| Fiskar Curved Scissors Item # RS006 |
$14.95 |
THE FISKAR CURVED FLY-TYING SCISSORS A favorite year after year. It's the Curved-Scissors that we use to trim woolhead sculpins. PLUS a great "general" do it all fly-tye scissors. PLUS perfect for GLO-BUGS. Can be re-sharpened at the mall when necessary.
>> View Item
| Brassie Hair Packer Item # RS007 |
$5.95 |
BRASSIE BRAND "HAIR-PACKER" by Chris Helms is essential when "spinning" deer hair. After spinning the hair on the hook-shank, squeeze the "notches" in this tool around the hook-shank. Push and Tightly Pack Hair AND Thread At The Same Time. No other tool does it better.
>> View Item
| Marryat "CDC Feather TOOL" Item # RS009 |
$11.95 |
MARRYAT "CDC FEATHER TOOL" allows you to make CDC wings easily and quickly WITH NO WASTE. Simply insert the tip of the CDC feather into the end of the tool and twist to flatten the fibers for perfect parachute posts and emerger wings (easy to follow instructions included). Really great (necessary) tool!
>> View Item
